2x Remote 2x Receiver 6 Volt Double Control Wireless Power Switch Set Up To 2 Decoys 6V Battery
Control 2 hunting decoys with 2 keychain wireless switches. Wire 2 of your decoys and control it at once with 2 key chain FOB remote control (2 included)
A easy to wire remote control ON OFF power switch in latching function , Simple DIY unit for any 6 volt DC power system. This turnkey unit is complete with a plug and play wiring harness for a Mojo Duck Decoy.
Optimized for use with 6V batterys, marine battery systems, power switch for low voltage DC power sources and solar panel lighting systems, direct replacement for Baby Mojo Duck decoy, duckhunting mallard duck decoy, kids power car's ignition and lighting and a wide variety of DC 6 volt and equipment, DC LED lighting and low voltage power systems.
Easy pairing under learn function for additional receivers or remotes - https://youtu.be/zhFKvuycKM4
Plug and play wire harness for mojo duck decoys
Working voltage - 6 volt to 12 volt
50m range ( must be level surface ) - Thats over 100feet !!
Rated for up to 10A
Standby drain <10mA
315MHZ operating frequency
-108DBM receiving sensitivity
Eliminate need for messy wiring and switches
Can be used as a emergency kill switch
6 volt models can be used for mojo duck decoys
A lot of hardcore duck hunters are hacking this 12Vmonster remote control to work with a Lucky Duck Decoy - one of our coolest customers Ray R. has provided the wiring sequence to us so we could share with everyone. We hope this will help you save some time
Lucky Duck Wiring Sequence
1. Attach the 12Vmonster 6V +(red) to the lucky duck battery. 2. Attach the 12Vmonster -(black) to the lucky duck battery. 3. 12Vmonster wire 01 (red) will not be used and should be taped off. 4. Cut the black wire going to the lucky duck motor. 5. Attach the 12Vmonster wire 02(black) to the black wire just cut , running to the motor. 6. Jumper 12Vmonster - wire (black) same wire in step 2 to the other black wire resulting from step 4. 7. Turn luck duck switch to on position. 8. Use remote to turn lucky duck on/ off.
Note: There are multiple versions of the lucky duck, the above is for reference only and should only be tried if you can understand electronics. If this does not work on your lucky duck, we cannot be responsible.
Returns are also not accepted if the wiring harness has been cut and the product is no longer in sellable condition.
This is my second set of remotes. The first set lasted about 4 years before the fobs started to become unreliable. In defense of the product though they get used hard. Water hunts, field hunts, On/off a lot in all kinds of weather. Very pleased for the price and durability.
I didnt think this would be so easy to install. i figured it would take remote pairing but its really just plug and play. works great, more than enough range on the remote and i still have yet to need to replace the battery in my remote. this is a must have for any duck hunter using a motion decoy.
I believe it would be very beneficial to include a wiring diagram. It could tell the user what wires go to what device, should the user not have a plug and play set up.
Bought two remotes/two receivers that I used to turn two regular Mojo Mallards into remote Mojos. Installation was easy - plug and play on the one that used a 6v battery and had nylon connector and the other Mojo used a 4AA battery pack so I wired the receiver inline with the battery pack. There is a good YouTube video that shows you how to make the wire connections.
So far, very pleased as they both work off one remote. Time will tell on longevity, but I am very happy with the results so far.
Good product for the price. Only down side was I ordered 2 with different frequencies and they sent the same frequency
Works perfect, plug and play application made installation very easy and super fast.